An easy to install PL-259 coax cable connector. No crimping tools or special skills are needed to install these connectors. Simply strip 1" (25mm) from the outer coax covering, trim away 3/4" (19mm) of shielding and peel the other 1/4" (6mm) back over the outer cover itself. Next, strip 1/2" (12mm) of insulation off of the center conductor and thread the connector on to the coax. Solder center conductor at tip and you're done! The T6-259 has a 6mm hole designed for RG-58 type single lead coax. The T7-259 has a 7mm hole for use with RG-8X and also RG-59 type coax that is used on co-phase harnesses. WHERE TO BUY?

For Current Pricing ...See Link On Home Page for printable Manufacturers Suggested List Price Sheet.
Prices may vary at different locations.

1 Year Warranty